
Ask who actually builds the mold
Some trading companies have no workshop. They take your order, place it with a factory and relay messages. That adds a layer between you and the people cutting steel. Ask whether design, machining and testing happen in the same place, and request a video walkthrough of the workshop.
A supplier with its own engineers can answer technical questions on the spot. If every question needs a day of "checking with the factory", you are probably dealing with an intermediary.
Look at how they communicate
Fluent English is useful but not the whole picture. What matters is whether they restate your requirements clearly, flag problems early and send progress updates without being chased. A supplier who says yes to everything is often the one who surprises you later.
Set up a regular update rhythm before the project starts. Photos or short videos at key stages tell you more than a status word.
Understand the quality system
Records beat promises
Ask for one first-sample report from a past project, with measured dimensions. A supplier who keeps those records can show how a tool was tested. A logo on a website says nothing about how a part gets inspected.
Ask how they inspect steel, dimensions and first samples, and whether they keep records. If your industry expects ISO 13485 or IATF 16949, confirm what the supplier can align with and what you must verify yourself. Do not take a logo on a website as proof of certification.
A first-sample report with measured dimensions is a good sign. It shows the tool was tested rather than shipped straight from the machine.
Start with a small order
If you have not worked with a supplier before, a pilot run or a single prototype tool is a lower-risk first step. It tests communication, quality and delivery on something you can afford to redo.
Check how they handle a problem. A supplier who owns a mistake and fixes it is worth more than one who never admits there was one.
Practical red flags
A price far below the others, reluctance to show the workshop, no sample testing, vague answers about steel grade and pressure to pay in full before work starts are all reasons to slow down.
Visit in person if you can, or ask for a live video call on the shop floor. Most serious factories are happy to show it.
| Check | Good sign | Warning sign |
|---|---|---|
| Workshop | Engineers and machines on site | Every question needs "checking with the factory" |
| Samples | Measured first-sample report | Tool shipped without a test |
| Payment | Deposit, balance after approval | Full amount up front |
| Updates | Photos at key stages | Status only when you ask |
Watch the process
Questions about your own part? Send us the drawing for a quote.
Read about our factory →